Safety tips for using a magnet drill are very important when working with it. Magnetic drill is used to drill all kinds of metals. Drill magnet bases have magnetic properties and firmly stick to the work surface. With this drill, you can easily make holes in places where access is difficult.

When choosing a drill, you need to know how many holes you need to do your job. Of course, the bigger and heavier the magnetic drill, the more holes it will make and the more professional it will be. If your work is not heavy and the metal you are dealing with is thin, light and small drills are the best choice for you. Before observing the safety tips of using a magnetic drill, you should be careful in buying and choosing the right drill. Stay with us until the end of this Radiraan tools article to learn about the magnet drill and its related safety tips.

Read this article to learn about the best external drill magnets.

Getting to know the magnet drill

Getting to know the magnet drill
Magnetic drill or magnet drill is an electric device for cutting and drilling metal. This device consists of three main parts: magnetic base, drill base and motor.

Safety tips for using a magnet drill, if followed, you can easily use this device in places that are difficult to access. The most important point in the safety of the device is to make sure that its magnetism is working properly. With the help of this drill and its magnetic base, it can be easily fixed on different surfaces. In places such as truck boards, large and fixed metal parts such as the skeleton of a building where it is not possible to move anywhere, the best way is to use a magnet drill. This cannot be done with ordinary drills.

Click to learn about the basic use of the drill.

Safety tips for using a magnet drill

Safety tips for using a magnet drill that we should pay attention to
The best way to know the safety tips for using a magnet drill is to read the manual that comes with the device. Farsi language is available in most of the booklets, but if it is not available, we have given some important items below so that you can familiarize yourself with them and the conditions of its use before buying a drill magnet.

The drill in the magnetic drill produces high heat. For this reason, you must use coolers. For this purpose, a soapy water tank is provided on the device. Before starting work, you should install it on the drill and fasten the hose of the soapy water tank to the device with the help of the nut on it.
After fixing the drill on the work surface, open the tap of the soapy water tank to prevent the drill from getting hot during drilling. Now safely turn on the device by pressing the key and work with it. Don’t worry about the longevity of the drill. With this, you can use the drill for a long time.
Another safety tip for using a magnet drill is to pay attention to the motor speed of the drill. Never use the fast cycle until 7 hours after starting to work. By doing this, it puts pressure on the drill and reduces its lifespan. After 7 or 8 hours you can use fast mode without any worries.
In places where you need the magnetic properties of the device, turn it on the work surface. Otherwise, do not enable this feature to avoid damaging the coils.
The magnetic drill also has hammer properties. For this reason, we should not put too much pressure on the drill while working with it. Applying more pressure will break the drill bit.
Click to view and buy the drill bit from Radiran website.

Using a magnet drill

Other safety tips for using a magnet drill
Magnetic drill is used for drilling on the surface of thin and thick metals. This drill sticks to surfaces with its magnetic bases and performs drilling very precisely and powerfully. This feature is activated by turning on the drill. This drill can be used horizontally, vertically and aerially. Sometimes we need holes that are above the head. In these cases, only a magnet drill will help you. Turn on the magnetic stand and fix it firmly above your head and then start drilling.

One of the most important safety tips for using a magnet drill is to make sure that if you want to use the drill somewhere above your body level, make sure to check that it is strong and stable before work. Because it may fall from a height or fall on your head while using it.

If we take a look at the history of this model of drill, we will find that it was used in construction works to drill iron beams. With this device, they created many holes in the metal body of iron skeletons in a short period of time. These drills are much more convenient in terms of strength and usage than manual and conventional drills. Also, these drills create larger holes in the surface. With this drill, you can make holes up to 4 cm deep, which is impossible with normal drills.

To fully understand how to use this product, read the article on how to use the drill magnet.

Maintenance of magnet drill

Maintenance of magnet drill
When you turn off the drill, you must clean it to remove excess oil and shavings from the surface of the machine.
After using the coal magnet drill a few times, check it. If the engine carbon is damaged, be sure to replace it.
During work, if a part is damaged, you must first unplug the device. Then repair that part so that other parts are not damaged.
Lubrication of various machine parts

Oh, like the gearbox and the rails, it should be done continuously. Otherwise, the parts will get corroded.
Every time you use the drill, be sure to check it.
How to catch the slack of the drill magnet?
One of the most important safety tips for using a magnet drill is to catch the drill’s slack, which causes the drill to break during work. For this, you have to go through several steps to get rid of it. Next, we will review these steps together.

Steps of lagging
First of all, prepare the allen and the wrench that comes with the device.
Loosen the nuts with an allen wrench.
Tighten the screws with the wrench that comes with the device. Tighten the screws until it is not difficult to move the device.
Now you need to re-tighten the nuts that you loosened with the allen wrench.
Don’t forget to grease the clutch frequently to keep it healthy.
In what jobs are magnet drills used the most?
This drill is used in most industries.

Metal welding
Oil, gas and petrochemical industry
Mobile repair shops
shed construction
Production workshops
Automotive and vehicles
Building and crowding
Shipbuilding
bridge building
Drill magnets are also used in other small and small industries knowing the safety tips of using drill magnets.

To learn more about the use of drill magnets in the industry and its components, read this Radiraan article.

Getting to know the different parts of the magnet drill
In order to be able to better observe the safety tips of using a drill magnet, it is better to know its components. In the following, we will examine the different parts used in the drill.

Engine
Gearbox motors are often used in these devices. These engines have a lot of power and will have the best performance. Maybe the first step of oiling these motors involves a cost, but in general, due to their high lifespan, they avoid spending a lot of money on buying a drill again. The best type of engine is a Gearbox engine.

Drill rod or axis
This part is connected to the drill. With the help of this section, circular cuts are made on the work surface.

Bracket or hook
This part establishes the connection between the axis and the cut. Also, the bracket can be a border to prevent deep drilling.

Your drill is empty
A hollow tool that has several cutting edges. This drill is used for drilling in metal and hard surfaces.

lamp
Magnet drills have a pilot light that gives you a better viewing angle by producing focused light.

magnetic feature
There is a button on the magnet drill to activate the magnetism. By pressing this button, the drill is firmly attached to metal surfaces and you can safely drill vertically, horizontally or overhead.

Protective body
The body protects all the internal components of the device and makes it easier for the operator to work with the device.

In the article on the size and weight of the drill magnet, we have fully explained the features and important points that should be considered when buying it.

Different types of drill magnets

Different types of drill magnets
There are different types of drills according to their performance and the places where they are used. In the following, we will examine different types of drill magnets together.

Electric magnet drill
This powerful drill works with electricity. For this reason, it works best in places where you have access to a power outlet.

Pneumatic magnetic drill
If you are in places where there is a high possibility of explosion or sparks, it is better to use this drill. Pneumatic drill is very effective in wet environments.

Hydraulic drill
This drill is used for wet environments such as around the sea or in industrial and construction drilling.

Conclusion
The first step to know the safety tips of using a drill magnet is to refer to the manual that comes with the device. In this article, we tried to explain the basic things while using the device to you so that you can use the device with full knowledge. Also, by observing the mentioned points, the life of the device will increase.

If you are planning to buy a magnetic drill or a home drill, you can get it from Radiran’s specialized tools store. Before buying, you can contact our consultants and use our experts’ advice for free. We are waiting for you in Radiraan.