In this article, we will examine what chamfering is and learn about its applications in the industry. The milling machine has many applications in the industry. This device is used to smooth the sharp and uneven edges of metals before welding.
What is chamfer?
At the time of welding or establishing any connection between two metal sheets or two pipes, the vertical and sharp edges must be smoothed first. This operation, which is done with a special device, is called chamfering. When working with this device, no vibration is felt and you can easily round the sharp edges. In fact, the chamfer machine turns the 90 degree angle into other angles to reduce their jaggedness.
The angle that the chamfer usually applies to metals is 37.5 degrees. If you need other angles, you can use the accessories that come with the device and give the desired angle to the sheets and pipes.
Click to get familiar with the application of sheet metal folding machine in different industries.
What is chamfering tool?
What is chamfering tool?
If you want to do plumbing or welding work in your home or workshop, you must first prepare the chamfer tool. Working with this device is not difficult at all. Just read the device guide and stay with us until the end of the article. Beveling tool is the beveling device used in welding and piping.
You can read the article “What is a chamfer tool and what is its use” to learn more about this product.
Application of chamfer
What is the answer so far? met. Now we need to know its uses. Chamfering machine is used in piping industry. Boiler finned pipes, water wall walls and thick pipes are easily chamfered with this device. Also, they use this device to smooth the uneven edge of pipes in plumbing.
It is not possible to chamfer thick pipes and sheets by hand. For this reason, a router is very important for businesses that have plumbing or repair work. knowing what is pakh? We notice that this device prevents pleating of the cross-section of metals. Also, they can easily seal the cooling pipes in businesses that deal with the repair of cooling equipment.
Application of chamfer
Why is it necessary to chamfer the ends of the pipes?
What is the importance of chamfer in plumbing and welding jobs becomes very clear. Before welding in thick pipes, you must have chamfered the ends of the pipes without burrs. This work can only be done with the help of a chamfer tool.
What is the power source of the paver?
The milling machine works in three ways. The force applied to this device is pneumatic, electric and hydraulic. You can place the device inside or on the pipe and chamfer according to your needs.
Difference between manual and automatic chamfer
As the name suggests, the manual chamfer performs chamfering with the operator’s hand. The chamfer created by hand is clean and smooth. Because the force of the operator’s hand controls the pressure on the surface. Manual chamfer is used for industries that deal with thin surfaces. These levels should not be more than 12 mm. It is used in industries such as framing and making decorative objects by hand.
In the automatic chamfering machine, all the work and force applied to the surface is applied through the machine. In the automatic model, there is no need to put pressure on the part of the operator. Automatic chamfers are used for thick and large pipes.
Compliance with safety measures for working with the device
Compliance with safety measures for working with the device
After we understand what is pakh? And in what cases it is used, it is time to learn the safety issues of working with this device. We must observe safety precautions so that nothing happens to the operator or metal surfaces. First, the device must be placed horizontally on the floor or desk. We must close the piece firmly on the device. One of the important points that you should pay attention to is the smoothness of the edges of the work. There should not be any traces of burns, damage or welding joints on it. If these things are observed on the surfaces, you should first remove them with the help of grinding and then proceed with chamfering.
The difference between a fixed or a movable chamfer
When buying a paver, you will be faced with two types, fixed and movable. Now you need to know the features of each one so that you can choose one of them.
Portable routers are very light and you can take them anywhere and use them. This device is very useful for building and plumbing repairs. However, due to their large volume and high weight, fixed chamfering machines cannot be moved anywhere and are mostly placed at the end of the production line in large workshops and factories.
What device should we buy?
First, you should know what pakh is, then proceed to purchase. Also, before buying, you need to know the size, material, thickness and number of pipes that you want to bevel in a day, so that you can buy the machine according to your needs.
Introduction of different types of paver machines
There are different types of paver machines in the market. Here we review some of the most high-quality and most widely used of them.
HardWorker model UZ18 plate cutter
This durable and practical paver is made in the Czech Republic. It has a lot of speed and power and you can adjust the slant angle with this device. This device can create an 18 mm wide bevel on the surfaces. With this device, you can continuously apply slopes of 15 to 50 degrees on surfaces. This model of the machine performs chamfering in two ways.
You can also use the sheet bevel or chamfer in assembly work. This device is very powerful and can easily chamfer brass, copper and aluminum surfaces.
Introduction of different types of paver machines
BDS pipe and sheet bending machine (BDS)
This portable device is made in Germany and has the most efficiency. The operator can easily carry it and take it to their projects. The new technology used in this device has made it possible to perform chamfering without any shaking or jumping.
The BDS portable device bevels a 30-degree angle on surfaces with a width of 12 mm with high precision and speed. BDS chamfer model EKF 530 has burrs made of tungsten carbide. The motor of the machine is 1800 watts and has variable speed control. The weight of the device is about 9.3 kg.
Pipe chamfer model EKF 450.3 BDS Germany
This device is used for chamfering at an angle of 45 degrees. They also chamfer surfaces made of steel, non-ferrous metals, brass and plastic easily. The motor of the device is 1500 watts and it has a series of triangular carbide cutters. The weight of the device is about 4.6 kg.
EKF 645 BDS sheet metaller
This chamfering machine is made by German designers and engineers. It applies an angle of 45 degrees on surfaces with a thickness of 15 mm. The motor of the device is 2300 watts and has variable speed control.
Conclusion
In this article, we examined what chamfering is and what its uses are. We also got acquainted with some models of the best chamfering machines. If you want to do plumbing or welding, it is inevitable to use a bevel machine before that. Now, if you want to buy the best chamfering machine, it is better to get it from the specialized site of Radiran tools. Also, before buying, you can call the numbers on the site and benefit from the free advice of our experts. We are waiting for you on the specialized site of Radiraan tools.
